Publications (Journals & Conferences)

No.

Article

1

A. El-Morsy, N. Akkus, K. Manabe, H. Nishimura, Evaluation of superplastic material characteristics using multi-dome forming test, Materials Science Forum, Vols. 357-359, 2001, p. 587-592.

In: Proc. of Int. Conf. “Superplasticity in Advanced Materials” ICSAM2000, USA, 2000.

2

A. El-Morsy, N. Akkus, K. Manabe, H. Nishimura, Finite element modeling of superplastic bulge forming with material parameters of multi-dome test, in: Proc. of 7^th Int. Conf. NUMIFORM 2001, JAPAN, 2001, p. 831-836.

3

A. El-Morsy, N. Akkus, K. Manabe, H. Nishimura, Superplastic characteristics of Ti-alloy and al-alloy sheets by multi-dome forming test, Materials Transactions, Vol. 42 (11), 2001, p.2332-2338.

4

A. El-Morsy, K. Manabe, FE simulation of rectangular box forming using material characteristics from multi-dome forming test, J. Materials Processing Technology, Vols. 125-126, 2002, p. 778-783.

In: proc. of 9^th Int. Conf. on Metal Forming, England, 2002, p. 778-783.

5

A. El-Morsy, K. Manabe, D.M. Kang, J.K. Hwang, A Study on the formability of deep drawing of magnesium alloy at high temperature, in: Proc. of Int. Symposium on Advanced Mechanical Engineering, JAPAN, 2002, p. 73-78.

6

A. El-Morsy, K. Manabe, D.M. Kang, J.K. Hwang, FE analysis on temperature and deformation of magnesium alloy sheet in warm deep-drawing process, in: Proc. of 5^th Int. Conf. on numerical simulation of 3D sheet forming, KOREA, 2002, p. 171-176.

7

A. El-Morsy, K. Manabe, H. Nishimura, Superplastic forming of AZ31 magnesium alloy sheet into a rectangular pan, Materials Transactions, Vol.43 (10), 2002 p.2443-2448.

8

A. El-Morsy, N. Akkus, K. Manabe, A new method for evaluation of superplastic characteristics of tubular materials, in: Proc. of 7^th Int. Conf. on Technology of plasticity (ICTP7), JAPAN, 2002, p. 499-504.

9

A. El-Morsy, K. Manabe, Effect of stress state on superplastic characteristics of titanium and aluminum alloys sheets, in: proc. of 5^th Egyptian-Syrian Conf. on Chem. & Petro. Eng., Egypt, (2003), p. 755-760.

10

T. El-Bitar, A. El-Morsy, M. Abdel-Aziz, A. Ismail, Grain size optimization of single hit-hot compressed Nimonic 80A superalloy using experimental design technique, Steel Grips 2, 2004, p. 511-515.

In: proc. 10^th Int. Conf. Metal Forming, Poland, 2004.

11

A. Ismail, T. El-Bitar, A. El-Morsy, M. Abdel-Aziz, Parameters affecting free spread of stainless. Steel Grade 304, Steel Grips 2, 2004, p. 71-74.

In: proc. of 10^th Int. Conf. on Metal Forming, Poland, 2004.

12

T. El-Bitar, A. Ismail, A. El-Morsy, A. Amer, Deformation of special steels, Steel Grips 5, 2004, p. 364-371.

in: proc. of Egypt–German Workshop, Egypt, (2003), p. 205-216.

13

A. El-Morsy, K. Manabe, Superplastic characteristics of A5083 Al-alloy: Experimental and Simulative Investigations, in: proc. of 12^th Arab Int. Aluminum Conf. (arabal2006), Egypt, 2006, p. 309-320.

14

A. El-Morsy, N. Akkus, K. Manabe, H. Nishimura, Evaluation of superplastic characteristics of tubular materials by tubular multi-bulge test, Materials Letters, Vol. 60, 2006, p. 559–564.

15

A. El-Morsy, K. Manabe, Finite element analysis of magnesium AZ31 alloy sheet in warm deep-drawing process considering heat transfer effect, Materials letters, Vol. 60, 2006, p. 1866-1870.

16

A. Ismail, M. Abdel-Aziz, A. El-Morsy, T. El-Bitar, Effect of hot deformation on the tribological behavior of Ti-6Al-4V alloy, Canadian Metallurgical Quarterly, Vol. 45 (4), 2006, p 469-474.

17

A. El-Morsy, A. Ismail, M. Waly, Microstructural Evolution of An AZ61 Magnesium Alloy Processed Through a Combination of Extrusion and Thermomechanical Processes, in: proc. of 1^st Afro-Asian Conf. on Advanced Materials Science and Technology, Egypt, 2006.

18

A. El-Morsy, Dry sliding wear behavior of hot deformed magnesium AZ61 alloy as influenced by the sliding conditions, Materials Science & Engineering A473, 2008, p. 330-335.

19

A. El-Morsy, A. Ismail, M. Waly, Microstructural and mechanical properties evolution of magnesium AZ61 alloy processed through a combination of extrusion and thermo-mechanical processes, Materials Science & Engineering A486, 2008, p. 528-533.

20

A. El-Morsy, Microstructural characterization of Ti-6Al-4V machining chips after remelting and bulk hot deformation, Steel Research Int. Vol. 79, 2008, p. 255-260.

In: proc. of 12^th Int. Conf. on Metal Forming, Poland, 2008.

21

A. El-Morsy, A. Ismail, A. Ibrahim, Evaluation of mechanical properties of fine-grained Al 7075 alloy produced through large strain hot rolling, Steel Research Int., Vol. 79, 2008, Vol. 2, p.447-451.

In: proc. of 12^th Int. Conf. on Metal Forming Poland, 2008.

22

A. Zaky, A. El-Morsy, A. Mousa, Effect of Thermo-Mechanical processing on microstructure and mechanical properties of 0.2C-0.32Si-1.3Mn-0.063V rebar steel, Steel Research Int., Vol. 79, 2008, p. 340-346.

In: proc. of 12^th Int. Conf. Metal Forming, Poland, 2008.

23

A. El-Morsy, Effects of grain size and second precipitate on the wear behavior of warm deformed AZ61 magnesium alloy, in: proc. of 10^th Int. Conf. Al-Azhar Engineering, AEIC, Egypt, 2008, p. 84-90.

24

A. Ismail, A. El-Morsy, T. El-Bitar, Effect of different cooling rates on thermo-mechanically processed high strength rebar steel, J. Material Processing Technology, Vol. 209, 2009, p. 1565-1569.

25

A. El-Morsy, Microstructural characterization of Ti-6Al-4V machining chips after remelting and bulk hot deformation, Materials & Design, Vol. 30, 2009, p. 1825-1829.

26

A. El-Morsy, A. Abouel-Kasem, Tribological characteristics of deformed magnesium alloy AZ61 under dry conditions, ASME, J. Tribology, Vol. 133, 2011, p. 1-8

27

A. Farahat, A. El-Morsy, T. El-Bitar, Microstructure and Tensile Properties of Severely Deformed Nb- Microalloyed Steel, in: proc. of 10^th Int. Conf. Technology of Plasticity (ICTP), Aachen, Germany, 2011, p. 1208-1212

28

A. El-Morsy, A. Ismail, The influence of age hardening on the microstructure and Mechanical Behavior of Wrought Magnesium Alloy AZ61, Steel Research Int., special issue, 2012, p. 827-830.

In: proc. of 14^th Int. Conf. on Metal Forming Poland, 2012.

29

A. Farahat, T. El-Bitar, A. El-Morsy, Effect of Severe Hot Deformation And Different Cooling Rates on the Microstructure and Mechanical Properties of 0.2 C-0.1 V- 0.02 Nb Steel, Int. J. Mech. Eng. (IJME), Vol. 2 (4), 2013, p. 43-50

30

A. El-Morsy, A. Farahat, Microstructure Variation and Mechanical Behavior of Aged AZ61 Wrought Magnesium Alloy, Life Science J., Vo. 10(3), 2013, p. 568-574.

31

A. Farahat, A. El-Morsy, T. El-Bitar, Severe Plastic Deformation of Large-Scale Nb-Microalloyed Steel Billet by Multi-Directional Forging Process, Steel Research Int., Vol. 85, 2014, p. 844-850.

32

A. El-Morsy, H. Shafeek, A. Alshehri, S. Gutub, Implementation of quality management system by utilizing ISO 9001:2008 model in the emerging faculties, Life Science J., Vol. 11, issue 8, 2014, p. 119-125.

Int. Jordanian J. Quality Assurance in Higher Education, 2014, Vol. 1, p. 174-180,

4^th Int. Arab Conf. on Quality Assurance in Higher Education, Jordan 2014, p. 965-970.

33

A. El-Morsy, A. Farahat, Low Frequency Damping Behavior of Aged AZ61 Magnesium Alloy, Int. Journal of Mechanical Engineering, Vol. 42, Issue 1, 2014, p. 1230-1235

34

A. El-Morsy, O. Dawood, Y. Kresha, R. Soliman, Effect of Austenitizing Temperature and Cooling Rate on Geometric Distortion of Deeply Drawn MIL-S-3289 Steel Cup, Int. J. Mechanical Engineering, Vol. 42, Issue 1, 2014, p. 1251-1257

35

A. El-Morsy and A. Farahat, Effect of Aging Treatment on the Damping Capacity and Mechanical Properties of Mg-6Al-1Zn Alloy, The Scientific World Journal, Vol. 2015, 2015, Article ID 170458.

36

Abdel-Wahab El-Morsy, Wear Characterization of Ti-5Al-3V-2.5Fe Alloy Produced by Recycling of Machining Chips, Int. J. Eng. Trends & Techno. (IJETT), Vol. 28 (5), 2015, p. 256-259.

37

Fayiz Abu Khadra, Abdel-Wahab El-Morsy, Prediction of Springback in the Air Bending Process Using a Kriging Metamodel, Eng. Techno. & Appl. Sci. Res., Vol. 6 (5), 2016, 1200-1206.