Academic Conferences, Symposiums and Workshops
|
|
- Academic Conferences, Symposiums and Workshops Attended
|
1
|
Int. Conference on Superplasticity in Advanced Materials
- Evaluation of superplastic material characteristics using multi-dome forming test, In: Proc. ICSAM2000, p. 587-592.
|
USA, 2000
|
|
2
|
7th Int. Conf. on Numerical Methods in Industrial Forming
- Finite element modeling of superplastic bulge forming with material parameters of multi-dome test, NUMIFORM, p. 831-836.
|
Japan, 2001
|
|
3
|
Int. Symposium on Advanced Mechanical Engineering
- A Study on the formability of deep drawing of magnesium alloy at high temperature, p. 73-78.
|
Japan, 2002
|
|
4
|
9th International Conference on Metal Forming
- FE simulation of rectangular box forming using material characteristics from multi-dome forming test, p. 778-783.
|
England, 2002
|
|
5
|
5th Int. Conf. on numerical simulation of 3D sheet forming
- FE analysis on temperature and deformation of magnesium alloy sheet in warm deep-drawing process, p. 171-176.
|
Korea, 2002
|
|
6
|
7th Int. Conference on Technology of plasticity, ICTP7.
- A new method for evaluation of superplastic characteristics of tubular materials, p. 499-504.
|
Japan, 2002
|
|
7
|
5th Egyptian-Syrian Conf. on Chemical & Petroleum Eng.
- Effect of stress state on superplastic characteristics of titanium & aluminum alloys sheets, p. 755-760.
|
Egypt, 2003
|
|
8
|
Egypt–German Workshop on High Strength & Special Steels
- Deformation of special steels, p. 205-216.
|
Egypt, 2003
|
|
9
|
10th International Conference on Metal Forming
- Grain size optimization of single hit-hot compressed Nimonic 80A superalloy using experimental design technique, p. 511-515.
- Parameters affecting free spread of stainless. Steel grade 304, p. 71-74.
|
Poland, 2004
|
|
10
|
Symposium on Challenges of Nb Microalloyed Steel in Combination with Thermomechanical Processing (Organizer)
|
Egypt, 2004
|
|
11
|
Symposium on Uses of Nb in Microalloyed Thermomechanically Processed Steel (Organizer)
|
Egypt, 2004
|
|
12
|
12th Arab International Aluminum Conference
- Superplastic characteristics of A5083 alloy: experimental and simulative Investigations, p. 309-320.
|
Egypt, 2004
|
|
13
|
1st Afro-Asian Int. Conf. on Adv. Materials & Technology
- Microstructural Evolution of An AZ61 Magnesium Alloy Processed Through a Combination of Extrusion and Thermomechanical Processes.
|
Egypt, 2004
|
|
14
|
12th International Conference on Metal Forming
- Microstructural characterization of Ti-6Al-4V machining chips after remelting and bulk hot deformation, p. 255-260.
- Evaluation of mechanical properties of fine-grained Al alloy produced through large strain hot rolling, p.447-451.
- Effect of thermomechanical processing on microstructure and mechanical properties of rebar steel, p. 340-346.
|
Poland, 2008
|
|
15
|
10th International Conference Al-Azhar Engineering, AEIC
- Effects of grain size and second precipitate on the wear behavior of warm deformed AZ61 alloy, p. 84-90.
|
Egypt, 2008
|
|
16
|
10th International Conference on Technology of plasticity
- Microstructure and tensile properties of severely deformed Nb- micro-alloyed steel, p. 1208-1212
|
Germany, 2011
|
|
17
|
14th International Conference on Metal Forming
- The influence of age hardening on the microstructure and Mechanical Behavior of Wrought Magnesium Alloy AZ61, p. 827-830.
|
Poland, 2012
|
|
18
|
4th Int. Arab Conference on Quality Assurance in Higher Education
- Implementation of Quality Management System by Utilizing ISO 9001:2008 Model in the Emerging Faculty
|
Jordan
2014
|
|
19
|
KAUST Research Conference: Recent Trends in Predicting and Monitoring the Integrity of Composite (COMINT)
The Composite and Heterogeneous Material Analysis and Simulation, King Abdullah University of Science and Technology
|
Saudi Arabia
2015
|
|
20
|
Arab-American Frontiers of Sensor Science Symposium
U.S. National Academy of Sciences and King Abdullah University of Science and Technology
|
Saudi Arabia
2015
|
|